Cold-applied plastics
«Leader», «Leader S», «Leader PRO»
Cold–applied plastic "Leader" (hereinafter referred to as manual CP "Leader") is a highly viscous material equipped with a polymerization initiator (hardener) and, according to consumer orders, retroreflective glass beads, does not contain organic solvents. It is intended for obtaining thick-layer horizontal marking of the carriageway of highways with high functional durability.
The manual СP "Leader" is available in white, yellow, red, blue, green, and black colours.
The manual СP "Leader" is available in white, yellow, red, blue, green, and black colours.
APPLICATION
For manual CP "Leader", a dry hardener is recommended, which is added mechanically in accordance with the instructions for use of the application technique, depending on the ambient temperature in an amount from 0.5% to 2.5%.
METHODS OF APPLICATION
The consumption of plastic depends on the condition of the coating surface, the presence of surface treatment, and the method of application. The approximate consumption of manual CP "LEADER" for solid marking is 5.0-7.5 kg/m2, for structural 3.5-5.0 kg/m2, for profile marking, the consumption can reach 7.0-12.0 kg/m2, depending on the profile relief.
Consumption of microgloss beads is from 250 to 500 g/m2. The recommended granulometric composition of microgloss beads is 400-840 microns, surface treatment is adhesive and flotation
For manual CP "Leader", a dry hardener is recommended, which is added mechanically in accordance with the instructions for use of the application technique, depending on the ambient temperature in an amount from 0.5% to 2.5%.
METHODS OF APPLICATION
The consumption of plastic depends on the condition of the coating surface, the presence of surface treatment, and the method of application. The approximate consumption of manual CP "LEADER" for solid marking is 5.0-7.5 kg/m2, for structural 3.5-5.0 kg/m2, for profile marking, the consumption can reach 7.0-12.0 kg/m2, depending on the profile relief.
Consumption of microgloss beads is from 250 to 500 g/m2. The recommended granulometric composition of microgloss beads is 400-840 microns, surface treatment is adhesive and flotation
Cold-applied spray plastic "Leader S" (hereinafter referred to as CP spray "Leader S") is a chemically cured material in the presence of an initiator of radical polymerization. It is intended for road markings on highways and streets with an improved coating, it is applied by spraying with a layer thickness of up to 1.5 mm.
CP "Leader S" spray is available in white, yellow, red, and green colours.
CP "Leader S" spray is available in white, yellow, red, and green colours.
APPLICATION
For CP "Leader S" spray, a liquid hardener is recommended, which is added mechanically in accordance with the instructions for usage of the application technique, depending on the ambient temperature, in an amount from 0.5% to 2.5%, while it is forbidden to inject the hardener into a bucket with CP.
The approximate curing time with 2% of the hardener at a temperature of 20 ° C and humidity of about 60% is 15-20 minutes.
METHODS OF APPLICATION
It is applied using specialized marking equipment.
The approximate consumption of spray plastic is 1.0-1.8 kg / m2, depending on the condition of the coating surface, the presence of surface treatment, and the method of application. Consumption of microgloss beads is from 200 to 400 g/m2. The recommended granulometric composition of microgloss beads is 100-600 microns, surface treatment is adhesive and flotation.
For CP "Leader S" spray, a liquid hardener is recommended, which is added mechanically in accordance with the instructions for usage of the application technique, depending on the ambient temperature, in an amount from 0.5% to 2.5%, while it is forbidden to inject the hardener into a bucket with CP.
The approximate curing time with 2% of the hardener at a temperature of 20 ° C and humidity of about 60% is 15-20 minutes.
METHODS OF APPLICATION
It is applied using specialized marking equipment.
The approximate consumption of spray plastic is 1.0-1.8 kg / m2, depending on the condition of the coating surface, the presence of surface treatment, and the method of application. Consumption of microgloss beads is from 200 to 400 g/m2. The recommended granulometric composition of microgloss beads is 100-600 microns, surface treatment is adhesive and flotation.
Cold–applied plastic "Leader PRO" (hereinafter referred to as СP "Leader PRO") The highly viscous material, equipped with a polymerization initiator (hardener) and, according to consumer orders, retroreflective glass beads, does not contain organic solvents. It is intended for obtaining thick-layer horizontal marking of the highways with high functional durability.
СP "Leader PRO" is available in white, yellow, red, and green colours.
СP "Leader PRO" is available in white, yellow, red, and green colours.
APPLICATION
For CP "Leader PRO", a liquid hardener is recommended, which is added mechanically in accordance with the instructions for use of the application technique, depending on the ambient temperature in an amount from 0.5% to 2.5%.
METHODS OF APPLICATION
The consumption of plastic depends on the condition of the coating surface, the presence of surface treatment, and the method of application. The approximate consumption of material for solid marking is 5.0-7.5 kg/m2, for structural marking 3.5-5.0 kg/m2, for profile marking the consumption can reach 7.0-12.0 kg/m2, depending on the profile relief.
Consumption of glass beads is from 250 to 500 g/m2. The recommended granulometric composition of glass beads is 400-840 microns, surface treatment is adhesive and flotation.
For CP "Leader PRO", a liquid hardener is recommended, which is added mechanically in accordance with the instructions for use of the application technique, depending on the ambient temperature in an amount from 0.5% to 2.5%.
METHODS OF APPLICATION
The consumption of plastic depends on the condition of the coating surface, the presence of surface treatment, and the method of application. The approximate consumption of material for solid marking is 5.0-7.5 kg/m2, for structural marking 3.5-5.0 kg/m2, for profile marking the consumption can reach 7.0-12.0 kg/m2, depending on the profile relief.
Consumption of glass beads is from 250 to 500 g/m2. The recommended granulometric composition of glass beads is 400-840 microns, surface treatment is adhesive and flotation.
Important for road marking brigades! Application technology
TRANSPORTATION AND STORAGE
CP spray is transported and stored in a tightly sealed container at a temperature not exceeding +30 ° C in compliance with applicable fire safety regulations. Transportation and storage of plastic and the polymerization initiator are carried out separately.
Delivery time from 2 days, subject to availability in stock.
Production time from 2 days.
The guaranteed shelf life is 12 months from the date of manufacture.
Packaging - metal buckets 25 - 30 kg.
Delivery time from 2 days, subject to availability in stock.
Production time from 2 days.
The guaranteed shelf life is 12 months from the date of manufacture.
Packaging - metal buckets 25 - 30 kg.
If you want to purchase Cold–applied plastic,
please make an order.
please make an order.
Main office
53, Shcherbakovskaya str,
Moscow, Russia
Moscow, Russia
Contacts
+ 7 495 792 42 19
+375 29 723 40 25
(telegram, whatsapp)
sales@richchemical.ru
+375 29 723 40 25
(telegram, whatsapp)
sales@richchemical.ru
Manufacturing
17, Trudovaya str,
Kimry, Tverskaya region,
Russia
Kimry, Tverskaya region,
Russia
Make an order
Fill out the form below and our manager will contact you shortly
By clicking the button, you consent to the processing of personal data and agree to the privacy policy