MATERIAL FOR THE RESTORATION OF ASPHALT CONCRETE PAVEMENT AND CRACKS IN THE ROADWAY.
"CARBON" AN ELASTIC SEALANT BASED ON METHACRYLIC RESINS.
IT CONSISTS OF THREE PRE-DOSED COMPONENTS: COMPONENT A - RESIN, COMPONENT B - FILLERS, COMPONENT C – HARDENER

Advantages:

• IT DOESN’T REQUIRE SPECIAL EQUIPMENT AND HEATING;
• IT HAS HIGH ADHESION;
• IT HAS LOW CONSUMPTION;
• IT PENETRATES DEEPLY INTO THE PORES OF THE ROAD SURFACE;
• DRIES QUICKLY;
•  IT HAS INCREASED ELASTICITY;
• INCREASES THE WEAR RESISTANCE OF THE COATING.
• WHEN USING CARBON, THE SERVICE LIFE OF THE COATING IS 3 EARS.

APPLICATION RECOMMENDATIONS: (applied manually).
1. Mix the main composition (Component A + Component B) thoroughly for 1-2 minutes.
2. Mix component C thoroughly into the main composition for 1-2 minutes.
3. Apply the sealant evenly on the road surface.
4. Smooth it out with a spatula.
Formation time: about 30 minutes. Pot life of the finished mixture: 10 minutes at +20 °C.
Working conditions: dry application surface, air temperature from +5 ° C to +35 ° C,
air humidity – no more than 85%.
WARNING: DO NOT APPLY the sealant on a wet, unprepared road surface.