Composition: high-polymer bitumen, styrene additives and special reagents.
‘Rich Chemical’ LLC's own innovative development
There are no analogues in the Russian market.

How the ‘FF emulsion’ works: when ‘FF emulsion’ is mixed with milled and pre-crushed asphalt (RAP or recycled asphalt powder), the emulsion reacts with old bitumen, "activating and reanimating" it. As the result we got the mixture – cold asphalt.
The ratio of emulsion / asphalt chips = 2 : 100.

Advantages of ‘FF emulsion’:
- the emulsion does not require heating before mixing with asphalt chips;
- does not delaminate during storage and when exposed to low or high temperatures;
- there is no water in the composition;
- shelf life: 12 months.

The usage of cold asphalt produced with ‘FF emulsion’:
- pit repair;
- to eliminate defects in asphalt concrete pavement;
- when arranging the lower and middle layers of the roadway;
- for asphalting a small area within a household.

Advantages of cold asphalt produced using ‘FF emulsion’:
- the possibility of carrying out repair work at: from -25 to + 30, also it is possible in the rain;
- does not require heating of asphalt chips and binder component no harmful emissions;
- no need to process the edges and bottom of pits with bitumen primers;
- does not stick for 12 months when stored in sealed containers or packages;
- allows to restore the worn-out top layer without milling;
- a light tamper or vibrating plate is needed for sealing;
- opening the movement immediately after laying.